How to Spot a Failed Window Seal
Fogging between the panes means the inert gas fill is gone and the insulating value has dropped. Here is how to identify failed seals in your San Diego home and decide whether repair or replacement makes more sense.
What you'll learn
- The difference between surface condensation and inter-pane fogging, and why only one signals a failed seal
- How to test suspected seal failure on a warm sunny afternoon versus a cool morning
- When an IGU replacement (glass swap only) is worth it versus a full window replacement
- What the fog stain pattern tells you about how long the seal has been failing
Step by step
- [object Object]
- [object Object]
- [object Object]
- [object Object]
- [object Object]
[object Object]
Rather have a pro handle it?
Insured local window crews across San Diego County. In-home measure, written quote from the crew.
Keep learning.
How to Measure Windows for Replacement
Accurate measurements before you get quotes save time and prevent the most common ordering mistake: windows that are a quarter inch too large to seat properly. Here is how to measure for a retrofit replacement in a typical San Diego home.
How to Clean Window Tracks and Hardware
San Diego salt air loads up window tracks with salt residue, grit, and oxidation that makes sliders and double-hung windows hard to operate. Clean tracks and lubricated hardware fix most sliding and lifting problems without a replacement.
How to Recaulk Window Perimeters
Exterior caulk around window frames lasts 5-15 years in San Diego before it shrinks, cracks, or pulls away from the frame. Recaulking is one of the highest-value DIY maintenance tasks: a $20 tube of exterior caulk and two hours of work seals out moisture and drafts.